|Home||» Products||» Mineral Water Plant||» Turnkey Project Mineral Water Plant|
Mineral Water Plant
EFPL offered machines are examined under the supervision of our experts for stringent compliance with setindustrial standards. In addition to this, the offered range of products ishighly praised by our clients that are situated all across the globe. Ourportfolio of reverse osmosis systems includes those specifically engineered anddesigned for large industrial applications, medium sized commercialapplications, small laboratory applications and trailer-mounted mobile systemsfor temporary and emergency applications. With decades of R&D and standardproduct development devoted to reverse osmosis systems engineering, andthousands of installations around the country, customer can rely on EFPL fortheir most demanding liquid separation and purification needs using reverseosmosis technologies. OurRO plants make sure to keep the natural nutrients to maintain the health levelof water. We design customize solutions which are suitable for marineapplications to purify a large amount of water at once with high-Performancecapacity.
Treatment Process of RO plants:
Fluid systems RO plants work on the basis of Cross-filtration method, through which a percentage amount of feed water is rejected as the removal of solids during the filtration process. The whole process works through the combination of temperature and pressure. There are two elements while RO plants processing which are system recovery and product quality.
Reverse osmosis is water purification process in which pre-treated & filtered water is connected to the high-pressure pump where pressure is developed and fed to the RO membrane. Reverse Osmosis membranes work on the Cross flow Filtration method where the salts get rejected partially and deliver pure water. Purified water is referred to as product and waste water is referred to as concentrate or reject. The percent of water delivered as product is called the recovery. The ratio of recovery&output parameters depend upon the feed water quality, type of membrane,temperature and total RO unit design considerations.
Raw water is water found in the environment that has not been treated and does not have any of its minerals,ions, particles, bacteria, or parasites removed. Raw water includes rainwater,groundwater from infiltration wells, and water from bodies like lakes an drivers. Raw water pump is way to transfer the water into the engine through a seacock fitting and pumping it through the engine's water jacket.
Pressure Sand Filter (PSF)
Here the water is filtered by Pressure sand filter for removal of suspended matters and turbidity.
Activated Carbon Filter is used to adsorb chlorine, organics,tri-halo methane (THM), taste, odor, and color from Water & Wastewater.Activated carbon is a charcoal that has been treated with oxygen to open up millions of tiny pores between the carbon atoms. Activat edcarbon works via a process called adsorption having efficiency upto 90% whereby pollutant molecules in the fluid to be treated are trapped inside the pore structure of the carbon substrate.